Application of Statistical Quality Control Tools for Analyzing and Improving Rebar Manufacturing Processes: A Case Study of Zliten Iron and Steel Factory

Abrahim Saad Qarash; Ali Altaher Al-Mahmoudi

doi:10.64516/dp1c6903

Authors

Abrahim Saad Qarash Faculty of Natural Resources Engineering/Al-Ajilat, Department of Engineering Management, University of Zawiya, Libya, Al-Jamil. Author
Ali Altaher Al-Mahmoudi Faculty of Natural Resources Engineering/Al-Ajilat, Department of Engineering Management, University of Zawiya, Libya, Al-Jamil Author

DOI:

https://doi.org/10.64516/dp1c6903

Keywords:

Statistical Quality Control, Control Charts , Quality Improvement, Rebar Manufacturing, Zliten Iron and Steel Factory

Abstract

The iron and steel industry is one of the fundamental pillars of economic development and infrastructure expansion. Rebar used to reinforce concrete structures, is a key product in this industry, where its quality plays a crucial role in ensuring structural safety and durability, necessitating continuous quality control. This study explores the application of Statistical Quality Control (SQC) techniques to improve the quality of rebar produced at the Zliten Iron and Steel Factory in Libya. Data related to rebar with a diameter of 14 mm, commonly used in concrete structures, were collected from production lines and analyzed using the Minitab software. The analyses involved the construction of X-bar and R control charts to monitor process variations and identify deviations that may indicate quality issues. The results revealed specific instances of process instability, and corrective measures were proposed to enhance product consistency. The study demonstrated that implementing SQC techniques could significantly improve product quality and reduce defects, aligning with both Libyan and international standards. The study recommends continuing the use of SQC tools and training staff to ensure the sustainability of quality improvements.

References

[1] Montgomery, D. C. (2019). Introduction to Statistical Quality Control (8th ed.). Wiley.

[2] Deming, W. E. (2018). The Essential Deming: Leadership Principles from the Father of Quality. McGraw-Hill.

[3] Evans, J. R., & Lindsay, W. M. (2020). Managing for Quality and Performance Excellence (11th ed.). Cengage Learning.

[4] Mitra, A. (2016). Fundamentals of Quality Control and Improvement (4th ed.). Wiley.

[5] Al-Roumi, M., et al. (2019). "Study of Some Mechanical Properties of Reinforcement Steel in Libyan Factories." International Journal of Science and Technology, 18, 1–15.

[6] Bin Hekouma, M. A., Abu Bakr, A. T., Ahmed, A. A., & Juma, M. S. M. (2023). "Application of Statistical Control Charts and Pareto Diagram in Monitoring and Controlling the Quality of Tinplate Production: A Case Study on the Hot Rolling Mill of the Libyan Iron and Steel Company." Journal of Industrial and Production Engineering, 12(4), 123–135.

[7] Gupta, A., Sharma, R., & Patel, K. (2023). "Enhancing Process Stability in the Steel Industry Using Statistical Control Charts." Journal of Industrial Engineering and Management, 15(3), 198–210.

[8] ASQ (2024). Statistical Quality Control Methods. American Society for Quality.

[9] Borucka, A., Kozłowski, E., Antosz, K., & Parczewski, R. (2023). "A New Approach to Production Process Capability Assessment for Non-Normal Data." Applied Sciences, 13(11), 6721.

[10] ISO 6935-2:2015. Steel for the Reinforcement of Concrete - Part 2: Ribbed Bars.

[11] Libyan Iron and Steel Company. (2023). Quality Standards Manual for Reinforcement Steel Production. Tripoli, Libya.