Designing a Subsea Pipeline System Using PIPESIM Software

Authors

  • Nourden Mohamed Abdelsadeg Department of Chemical and Petroleum Engineering, Elmergib University, Alkoms, Libya. Author

DOI:

https://doi.org/10.64516/gm3mna45

Keywords:

Subsea, PIPESIM software, Flow assurance

Abstract

Offshore oil and gas production accounts for about 30 percent of the world oil and gas. Transporting produced oil and gas from offshore to onshore facilities is a challenging task for many oil and gas companies due to the hostile environment that offshore has. This paper aims to use PIPESIM software to design a subsea pipeline system that ensures the flow of oil and gas from wellhead to platform. Pipeline diameter, erosion check, hydrate formation determination, insulation, slugging and pressure drop were determined. 

References

1. Offshore oil and gas activities. Project report . 14190128 deloitte, Californi, USA, 2017.

2. Qiwei Wang, Flow Assurance (Oil and Gas Chemistry Management Series), 1sted., vol.2. Elsevier, 2022.

3. Schlumberger. (n.d.). Pipesim Flow Assurance Modeling. SLB, a global technology company. Retrieved November 25, 2022, from https://www.software.slb.com/products/pipesim/pipesim-flowassurance.

4. Bai, Y., & Bai, Q. Subsea pipelines and Risers. 1st ed., vol.1. Oxford: Elsevier,2005.

5. Marfo, Solomon & Opoku Appau, Prince & Kpami, Akpa. 2018. Subsea Pipeline Design for Natural Gas Transportation: A Case Study of Cote D'ivoire's Gazelle Field. 4. 21-34. 10.20431/2454-7980.0403003.

6. Marfo, Solomon & Opoku Appau, Prince & Acquah, Joseph & Amarfio, Eric. (2019). Flow Assurance in Subsea Pipeline Design - A Case Study of Ghana's Jubilee and TEN Fields. Ghana Mining Journal. 19. 72- 85. 10.4314/gm.v19i1.9.

7. Schlumberge (2011) Steady-State Multiphase Flow Simulation (PIPESIM), available athttp://www.slb.com/services/software/production_software/prod_analysis_diagnostics/pipesim.aspx accessed at April 20, 2012.

8. VEGA-MEZA, D. (2013); EG55F8: Flow Assurance – Lec. notes: Hydrates, page 2 University of Aberdeen

9. JP Kenny - Subsea Production Systems – Pipe in Pipe, available at http://www.jpkenny.com/SiteCollectionDocuments/PIPE%20IN%20PIPE%20REV%2001.pdf ,accessed at May 1, 2012.

10. VEGA-MEZA, D; EG55F8: Flow Assurance, Lec. notes: Multiphase Pressure Loss/Slugging, page 74 University of Aberdeen, Scotland

Downloads

Published

31-12-2022

Issue

Section

Articles

How to Cite

[1]
N. M. Abdelsadeg, “Designing a Subsea Pipeline System Using PIPESIM Software”, TUJES, vol. 3, no. 2, pp. 1–15, Dec. 2022, doi: 10.64516/gm3mna45.